Hydraulic Cone Penetrometer 10 Ton
ASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers.
Consist of :
- Hydraulic Driving Appliance : Steel construction, hydraulic operated 10 Ton Capacity Design with double cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale, 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges.
- Manometer : 100 kg / cm² capacity, lower mount connection.
- Manometer : 1000 kg / cm² capacity, lower mount connection.
- Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 13.5 HP, hand starter.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor : Machined steel.
- Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets, 1.4 metre length.
- Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare.
- Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1).
- Long Fasten Press : Beam cannal, 160 cm length, 15 cm width.
- Hydraulic Hose : Flexible hose with push/ pull coupler. 300 cm length, 10.000 psi capacity.
- Field Trolley : Fillin sounding apparatus.
Standard supply with instruction manual operating
Overall dimension (l x w x h) : 130 x 105 x 210 cm / Gross Weight : 770 kg
Related products
-
CBR Laboratorium Electric
ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989
For determining the bearing ratio of soil.
Consist of :
- Mechanical Loading Machine : Electric, 220 V-AC, 1/2 HP, 1 Phase, speed 0.05″/min reversing switch 10.000 lbs capacity.
- CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar.
- Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height.
- Cutting Edge : Machine steel, sharp edge.
- Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight.
- Slotted Surcharge : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight.
- Swell plate : Alumunium with adjustable stem.
- Swell Tripod : Alumunium for mounting sweel dial gauge.
- Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height,10 lbs weight.
- Filter Paper : 6 inch diameter., 100 sheets/ box.
- Proving Ring : 6.000 lbs capacity.
- Dial Indicator : Measuring range 0.01″ x 1″.
- Swell Dial Penetration : Range 30 mm x 0.01 mm.
- Square Pan : Galvanized steel, 65 x 65 x 7.5 cm.
- Thin Box : Alumunium, 60 gr capacity.
- Graduated Cylinder : Plastic made, 1000 ml capacity, single numberin.
- Scoop : Cast alumunium, large size, round buttom.
- Trowel : Pointed type, wooden handle.
- Straight Edge : Galvanized steel, 300 mm length, for leveling samples in mold.
Dimension (l x w x h) : 110 x 70 x 70 cm / Gross weight : 200 Kg
-
Compaction Permeameter Test
For determining coeffisient of permeability of compacted soil sample
Consist of :
- Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d,inlet-outlet connector, overflow valve, porous stone.
- Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter).
- Graduated Cylinder : Glass made,100 ml capacity,single numbering.
- Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
-
Dynamic Cone Penetrometer
UJI CBR TEST I DCP TEST I DYNAMIC CONE PENETROMETER I ALAT LABOR TANAH
For determination of field CBR value (rapid quality control)
Consist of :
- Handle : Stainless steel.
- Hammer : Machined steel, Painted, 8 kg weight.
- Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm.
- Anvil : Machined steel, welded painted.
- Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective.
- Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor.
- Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale.
- Carrying Bag : Water proof cloth.
- Open End Wrench : Vanadium steel 12/13, 14/15.
Dimension (l x w x h) : 115 x 40 x 40 cm / Gross weight : 18 Kg
Reviews
There are no reviews yet.