Electric Sample Extruder
ELECTRIC SAMPLE EXTRUDER
For extruding soil speciment from 68 mm dia sampling tube (HAND BOR part), electric, 220 Volt, 750 Watt, 1 Phase. Supplied without sampling tube.
Dimension (l x w x h) : 40 x 50 x 130 Cm / Gross weight : 60 Kg
Related products
-
Dutch Cone Penetrometer 5 Ton
ASTM D3441
For determining cone resistance and friction resistance of soil layers.
Consist of :
- Press-In Apparatus : Steel construction, manually operated 5 tons capacity.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor : Machined steel.
- Spiral Anchor : Machined steel, welded 1.5 m length.
- Handle And T-piece : Machined steel, welded.
- Mantel Cone : Precision machine steel hardened tip, tappered thread. 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench, allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1). (1 Set)
- Fasten press : Beam Cannal.
- Long Fasten Press : 1.8 m length, 12 cm width.
- Short Fasten Press : 1.2 m length, 15 cm width.
- Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
- Manometer : 500 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
Dimension (l x w x h): 220 x 120 x 80 cm / Gross weight: 500 kg
-
Consolidation Test
Consolidation Test set untuk kebutuhan alat laboratorium teknik sipil anda. Segera hubungi kami untuk detail, surat penawaran atau pemesanan.
SO-515 Consolidation Test Set
ASTM D-2435 AASHTO T-216For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loadded and drain axially.
SO-516 Consolidation Frame
Consist of :
SO-516.1 Frame Cast alumunium, two test unit 1 Set
SO-516.2 Loading Set Three alternative lever arm 1: 9, 1: 10, 1: 11 2 SetSO-517 Consolidometer Brass, 50.5 mm sample dia., porous stone, loading cap. 2 Set
SO-518 Loads Slotted, machined steel
Consist of :
SO-518.1 Load 500 gr 4 Pcs
SO-518.2 Load 1000 gr 2 Pcs
SO-518.3 Load 2000 gr 2 Pcs
SO-518.4 Load 4000 gr 2 Pcs
SO-518.5 Load 8000 gr 2 PcsSO-519 Sample Tubes Machine steel, 50.5 mm dia., galvanized, with extruder 1 Set
GE-135 Dial Indicator Range 10.0 mm x 0.01 mm 2 Pcs
GE-840 Wire Saw 10 cm length approx. 1 PcAlso required,
but not part of this set:
SO-450 Moisture Content Test SetGE-521 Wash Bottle
GE-700 Stop Watch
GE-710 Vernier Caliper
GE-820 SpatulaDimension ( l x w x h) : 80 x 80 x 150 cm
Gross Weight : 130 kg -
Hydraulic Cone Penetrometer 10 Ton
ASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers.
Consist of :
- Hydraulic Driving Appliance : Steel construction, hydraulic operated 10 Ton Capacity Design with double cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale, 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges.
- Manometer : 100 kg / cm² capacity, lower mount connection.
- Manometer : 1000 kg / cm² capacity, lower mount connection.
- Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 13.5 HP, hand starter.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor : Machined steel.
- Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets, 1.4 metre length.
- Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare.
- Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1).
- Long Fasten Press : Beam cannal, 160 cm length, 15 cm width.
- Hydraulic Hose : Flexible hose with push/ pull coupler. 300 cm length, 10.000 psi capacity.
- Field Trolley : Fillin sounding apparatus.
Standard supply with instruction manual operating
Overall dimension (l x w x h) : 130 x 105 x 210 cm / Gross Weight : 770 kg
Reviews
There are no reviews yet.